SLP Two Way Direct Acting Solenoid Valve Descriptions

SLP two way direct acting solenoid valve is one type of solenoid valve normally closed, which is closed when de-energized, and open when energized.
Compact valve body, small in size, large flow rate, widely use.
Installtion in any position, vertical upright direction is the best.
Only 3/8″ connection size, orifice 3 and 4mm can be widely used in the corresponding flow and pressure system, replace the same connection size with big orifice valve, save a lot of cost.
Coil can fix SM Coil, AC220V/AC110V/AC24V/DC24V.
Pressure: 0 ~ 13bar
Pipe size: G3/8”
Orifice: 3mm~4mm
Body: brass
Voltage: AC 220V/230V/240V/110V (±10%)/24V 50/60Hz, 24V/12V DC
Seal & diaphragm material: NBR, VITON, EPDM
Max. allowable pressure: 15bar
Fluid temperature: 0℃~65℃
Mediums: air, gas, water, hot water, oil 
Threaded ends: G, NPT, PT, Rp, Rc (ASME B1.20.1, BS21/2799, DIN2999/259, ISO228-1, JIS B 0203, ISO7/1)