1 Operating
Large handwheels for
easy operation. Also
available with gearing.
motor actuators,
pneumatic or hydraulic
actuators for
more difficult services.

2 LIVE Load Packing
In services requiring
frequent cycling or with high
pressure/temperature
variations, live loading
estends the service life
between maintenance periods
by requiring less frequent
packing gland adjustments.
Belleville springs are
employed to privide constant
packing gland stress.

3 OS & Y
Outside Screw and Yoke.
Cast steel gl obe valve yoke
integral with bonnet for 10&
and smaller.

4 BB
Bolted bonnet. Welding
bonnet and pressure
seal bonnet inservices
requiring frequent cycling
or with high pressure/
temperature variations.

5 End Connections
End Connections
A choice of Flanged,
RFJ flanged of Buttwelding
end for piping flexibility.

6 Yokesleeve
Fumished in aluminum
bronze to reduce
operating torque, Most
sizes fumished with ball
bearing yokesleeves.

7 Lantern ring and
double packing set

Lantem ring with leak-off
fitting connection and double
packing stack is optionally
available for critical services.

8 Body-to-Bonnet Joint
A Male and Female joint
or Tongue and Groove
joint is used 150Lb to
600Lb valves. Ring joint is
used in the body to bonnet
connection in900Lb&
higher rated valves.

9Disc
Plug disc is stom guided on allsizes. Disc has a differential angle
front the seat to provide a line
contact for maximum sealing.
The bottom of V-port disc is
fuided by the body seat
ring for maximum disc stability
in throttling applications. The
soft TEFL ON ring is excellent
for lower temperature service
where tight shutoff is required.

10 Seat Rings
Separate heavy duty, full
ported rings for easy
maintenance. Screwed or
welded connection into
body.