ZS 2 Way Direct Acting Solenoid Valve Stainless Steel Material Descriptions

ZS 2 way direct acting solenoid valve stainless steel is one type of solenoid valve normally close, which is closed when de-energized, and open when energized.
Flow as the arrow, installtion in any position, vertical upright direction is the best.
Only 1/4″, 3/8″ and 1/2″ connection size, orifice 10mm and 13mm can be widely used in the corresponding flow and pressure system, replace the same connection size with big orifice valve, save a lot of cost.
Coil can fix SM Coil, AC220V/AC110V/AC24V/DC24V.
Pressure: 0 ~ 20bar
Orifice: φ10mm, φ13mm
Pipe size: G1/4” ~ G1/2″
Body: stainless steel
Voltage: AC 220V/230V/240V/110V (±10%)/24V 50/60Hz, 24V/12V DC
Seal & diaphragm material: NBR, VITON, EPDM
Max. allowable pressure: 25bar
Working pressure: 0~20bar
Ambient temperature: 0℃~65℃
Fluid temperature: 0℃~120℃
Mediums: air, gas, water, hot water, oil 
Threaded ends: G, NPT, PT, Rp, Rc (ASME B1.20.1, BS21/2799, DIN2999/259, ISO228-1, JIS B 0203, ISO7/1)